Cisco

Create WWNN and WWPN pools in UCS Manager

This is part of a series of posts on how to initially configure you UCS B-Series system using UCS manager. With the information in this post, you will be able to configure the vHBAs needed for FC connectivity. Check the other posts under the Cisco section in my blog. If you are using iSCSI you… Continue reading Create WWNN and WWPN pools in UCS Manager

Cisco

UCS B-Series Start to Finish – Part 3

Now that we have our system up to date with the latest software, we can start configuring the different templates, pools, and policies. The UCS is a stateless system, meaning that you will be able to abstract all the usual properties (UUID, MAC Address, etc…) into a Service Profile and apply those to any compatible… Continue reading UCS B-Series Start to Finish – Part 3